ASTM D1895 Apparent Density Tester , Bulk Density Meter Method A for Plastic
DF-1-06 can be used to measure the apparent density,bulk factor,and pourability of plastic materials.This instrument is produced in accordance with the method A of standard of ASTM D1895.As for the apparent density,DF-1-06 is more suitable for fine granule and powder.also can be poured readily through a small funnel.
Application:
This instrument is applicable to measure the plastic materials in the form of fine granule and powder.
Standard Accessories:
Holder,funnel,measuring cup,height pad,scraper blade,striker plate,tool and sample spoon.
Standards:
ASTM D1895,ISO60
Procedure:
Close the small end of the funnel with the hand or with a suitable flat strip and pour a 115±5cm³ sample into the funnel.Open the bottom of the funnel quickly and allow the material to flow freely into the cup.If caking occurs in the funnel,the material may be loosened with a small glass rod.After all the material has passed through the funnel.immediately scrape off the excess on the top of the cup with a straightedge without shaking the cup.Weigh the material in the cup to the nearest 0.1g.Calculate the weight in grams of 1cm³ of the material.
Specification:
| Model | DF-1-06 | DF-1-07 | DF-1-08 | DF-1-09 |
| Test Method | Method A | Method B | Method C | ISO method R60 |
| Cup | Measuring volume | 100±0.5 cm3 | 400±0.5 cm3 | 10003±0.5 cm | 53.8±0.5cm |
| Inner Dia. | 39.9mm | / | / | 45±5mm |
| Height | 79.8mm | 240±10mm | / | 79.8mm |
| Sampling quantity | 110~120ml | / | / | 60g |
| Funnel | Dia. of lower mouth | 9.5 | 25.4mm | / | 33mm |
| | Height | 114mm | 230mm | / | 115mm |
| Distance between cap can funnel | 38mm | / | 20~30mm |
►Packing
|
|
ASTM D1895 Apparent Density Tester, Bulk Density Meter Method A for Plastic Images
|
